Author | Topic |
Location: Terrigal
Registered: May 2002
|
4age distributor wiring
|
Sat, 27 November 2004 09:34
|
|
Hi all, i've almost finished my 4age smallport into ae86 conversion.
I wired it all up today but have a bit of a problem with the distributor.
The plug in the wiring harness had been cut off and wasn't there. I figured this would be easy enough just to join the wires up to the dizzy. But the problem is the colours of the wires coming out of the dizzy are different to those in the wiring loom.
Out of the dizzy is a red, green and two white wires. One of those white wires seems to join into 3 seperate wires when it goes inside the dizzy.
On the engine loom there is again 4 wires, but they are red, green, black & white. This is consistant with the wiring diagram also.
I figure can match up the green and red. but not sure about the black and whites. i did try to take a guess but got a bit of smoke out of the dizzy (hmm not good hope i didn't fuck it).
So yeah, does know how the wires from the dizzy are meant to go?
Thanks
Joel
|
|
|