| Author | Topic |
|---|
Toymods Forum Sponsor
Location:
Brisbane
Registered:
February 2003
|
|
Serious Expressions of Interest Required- 3TGTE stuff
|
Fri, 07 January 2005 14:06
|
 |
OK, time to reconsider my path with the dogbox.
I have the following items I am willing to part with for the right price. I'd prefer to sell the stuff complete but if enough people wish to share in the following them I'll split it up.
3TGTE engine. Requires a rebuild as I believe she has broken ring lands on the pistons.
3TGTE engine. good runner, has a custom plenum fitted with a 60mm 7MGTE throttle body that faces forward. The distributor has been modified and fitted with a nissan CA18 crank angle sensor and its wired for 2 dual output 7MGTE coils running waste spark. This is all being run by a new EMS Stinger management computer and running the stock 440cc injectors. Exhaust side has a stock manifold modified with a HKS external wastegate top mounted and a Trust TD05-16G turbo that was just recoed but a mis-fire the other week made short work of it. *SOLD*
This setup made 205rwhp @ 9psi when dynoed at Redcliffe Dyno and Performance. I have the dyno sheet around here somewhere, but its late and Im tired.
I also have brand new 3TGTE VRS, main bearings 0.010 under, bigend bearing 0.010 under, top and bottom timing chains all new. *SOLD*
There is also a 4Y crank and rods here to create a 2.15ltr stroker motor if you wish to.
So, in total there is as follows-
1 x 3TGTE suit repair
1 x 4Y crank and rods
Some other ancillery items such as stock distributor, AC pump, alternator etc..
Email me at soarer21@optusnet.com.au or PM me for a slower response 
[Updated on: Thu, 13 January 2005 20:30]
|
|
|
