ok after getting the ecu code that there is a problem with the vaccum sensor, using the tech docs of toymods.org, it says to test teh supply voltage to the sensor being 4-6v. wen i tested it with the multimetre it was supplying just under 2v which means the sesnor hasnt been doing its job. i disconected the sensor also to see if it had any adverse effects but didnt. so im guessing it wasnt doing anything at all. does anyone know what this sensor does? and if u guys have any idea how to get teh proper supplied voltage to it your help would be much aprecciated.
heres the link i used to get info, so u guys know what sensor it is http://toymods.org.au/Repository/TechDocs/...k/efi /fi_97.jpg
sorry btw its a 100kw 4age in stock form in a 90 SX seca
my car had electrical problems not long ago where it was running way to lean and the car would basically s##t itself wen u put ur foot down, and it was the ecu that had problems. is it possibe the dudes that fixed may not have wired somethin in properly, or that the ecu itself is rooted?
Sun, 27 March 2005 05:18
