| Author | Topic |
|---|
Location:
Melbourne, South East
Registered:
May 2004
|
|
Questions about 4age bigport 16v
|
Fri, 06 May 2005 14:03
|
 |
Just need some information guys:
1. Are the valve lifters and shims in the head of this engine identical for exhaust and inlet sides?
2. I was looking at the picture in tech docs of toymods of cylinder head picture 1 of a pretty intense engine in a lotta bits with labellings and numbers. I noticed numbers such as '280 (20,27)' does this represent the torque settings? if so which part does? is it in kg.cm or ft.lb?
thats got me pretty confused.
3. I need the torque settings for a lot of the bits of the engine, if question 2 is correct and those numbers represent torque settings than ignore this question please.
I require NM for head, inc camshaft bearing cap, head to bottom end bolts, inlet mani, exhaust mani (im running extractors 4-2-1 is it differnt?), cam gears.
4. What are the Torque settings for flywheel? are they the same as the 20v? i ran a search and found 20v torque rate but not 16v.
Thanks in advance guys
Choony
PS: everything is stock, besides the extractors 
|
|
|
