Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 4agze starts then stalls

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
wiso
Forums Junkie


Location:
Canberra
Registered:
April 2003
4agze starts then stalls Sun, 08 May 2005 09:26 Go to previous message
I am haveing some major problems with getting my 4agze to run continuisly. It is a Bigport AFM version out of the AE92 corolla with DLI, so its has a Crank Angle sensor and Coil Packs, in place of the dizzy like the AW11 version.

I am about 99% sure I have all the wiring correct except for one section, and it is a major section.

At first the car would turn over but would not fire, it has no spark. as far as i can tell the coil packs work fine, the igniter is fine, but I am not sure on how the Crank angle sensor works. I belive this could be where my problem is coming from. How do you tell if you have one timed at TDC with the engine? and what kind of voltages should I be looking for down the lines, is one a power, one a ground, the other 2 pickups or what? there are 4 wires, the ecu pinout codes read G-, G1, G2, NE.



Since I didn't have spark I tried an AW11 gze ecu which uses a Distributor and single coil system, put a GE dizzy on it and gave that a go. the car then started, but 1 sec later stalled everytime. the AFM seems fine, as does the fuel. so does anybody have any suggestions on what could be causing this. the thing I can see it may be tha same cause as the first try, cause a GE dizzy only has 2 wires to the ecu, while a GZE AW11 dizzy has the same 4 as the crank angle sensor. because the ecu is not reciveing these pickoffs could that be why the car stalls? or any other things I should try and look for? Or does anybody know how I could fool the ecu about the extra pickup that the GE dizzy does not have?

Any help would be appriciated

[Updated on: Sun, 08 May 2005 09:37]

  Send a private message to this user    

SubjectPosterDate
Read Message   4agze starts then stalls  wisoSun, 08 May 2005 09:26
Read Message   Re: 4agze starts then stalls beradSun, 08 May 2005 10:31
Read Message   Re: 4agze starts then stalls beradSun, 08 May 2005 10:32
Read Message   Re: 4agze starts then stalls wisoSun, 08 May 2005 11:09
Read Message   Re: 4agze starts then stalls beradMon, 09 May 2005 04:59
Read Message   Re: 4agze starts then stalls c2888Mon, 09 May 2005 06:29
Read Message   Re: 4agze starts then stalls wisoMon, 09 May 2005 07:10
Read Message   Re: 4agze starts then stalls sideshowMon, 09 May 2005 08:03
Read Message   Re: 4agze starts then stalls sideshowMon, 09 May 2005 07:09
Read Message   Re: 4agze starts then stalls YelloRollaMon, 09 May 2005 07:47
Read Message   Re: 4agze starts then stalls wisoMon, 09 May 2005 08:43
Read Message   Re: 4agze starts then stalls sideshowMon, 09 May 2005 08:50
Read Message   Re: 4agze starts then stalls wisoMon, 09 May 2005 12:57
Read Message   Re: 4agze starts then stalls wisoSat, 14 May 2005 07:35
Read Message   Re: 4agze starts then stalls beradMon, 09 May 2005 09:21
Read Message   Re: 4agze starts then stalls themx13Sat, 14 May 2005 13:10
Read Message   Re: 4agze starts then stalls sideshowSun, 15 May 2005 00:43
Read Message   Re: 4agze starts then stalls SilverGhostMon, 16 May 2005 09:16
Previous Topic:TA22 suspension options
Next Topic:82 hilux, help please

Goto Forum:
-=] Back to Top [=-

Current Time: Sun May 12 02:31:11 UTC 2024

Total time taken to generate the page: 0.0059330463409424 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.