F.A.Q.    Register    Login    Home Members    Search

Toymods » General Car Talk » Rim Size Limits - Guidlines and engineering Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
DRFT - 86 Regular Location: Batemans Bay, NSW Registered: February 2005	Rim Size Limits - Guidlines and engineering Fri, 13 May 2005 00:11 -- Ok this is one thing I finally want to understand.. Regarding increasing rims sizes on ur car. (diameter not width is all Im worrying about here) I always believed that the rim size could be increased 2" over the stock size.... but I then I was told (cant remember where/who) that you can increase the rim diameter as much as u like..providing that the tyre profile dosnt increase over 2" from the stock total diameter including rim/tyres...?? (this makes sense to me in some ways) as on my car I have 16" rims with 45 profile rubber...the total diameter is just a fraction smaller than the stock rim/rubber combo..(stock rims are 13") so is this the case or does it only apply to the rim size increase??? and lastly.... if it is only the rim increase. can bigger rims that go over the 2" limit be engineered?? any help answerig these Q's would be greatly appreciated... need to clear the confusion once and for all.. thanks. [Report message to a moderator]

	Subject	Poster	Date
	Rim Size Limits - Guidlines and engineering	DRFT - 86	Fri, 13 May 2005 00:11
	Re: Rim Size Limits - Guidlines and engineering	Cool1	Fri, 13 May 2005 00:24
	Re: Rim Size Limits - Guidlines and engineering	draven	Fri, 13 May 2005 02:43
	Re: Rim Size Limits - Guidlines and engineering	DRFT - 86	Fri, 13 May 2005 03:16
	Re: Rim Size Limits - Guidlines and engineering	Toobs	Fri, 13 May 2005 05:14
	Re: Rim Size Limits - Guidlines and engineering	draven	Fri, 13 May 2005 16:38
	Re: Rim Size Limits - Guidlines and engineering	CrUZsida	Fri, 13 May 2005 05:23
	Re: Rim Size Limits - Guidlines and engineering	Toobs	Fri, 13 May 2005 05:30
	Re: Rim Size Limits - Guidlines and engineering	Toobs	Fri, 13 May 2005 05:31
	Re: Rim Size Limits - Guidlines and engineering	DRFT - 86	Fri, 13 May 2005 05:49
	Re: Rim Size Limits - Guidlines and engineering	Toobs	Sat, 14 May 2005 00:04
	Re: Rim Size Limits - Guidlines and engineering	Cool1	Sat, 14 May 2005 00:08

Previous Topic:	Thoughts on MA6x digi dash vs RA6x/GA6x analog one?
Next Topic:	Shed Space in Brisbane Needed

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.