| Author | Topic |
|---|
Location:
Newcastle
Registered:
August 2003
|
|
Billzilla.org - 2litre BDA engine.
|
Tue, 07 June 2005 15:53
|
 |
"The twin cam 4AGE is basically a road going, mass produced version of the Ford Cosworth BDA twin cam racing engine. They share the same bore and stroke (81mm x 77mm), the same size valves (29.5mm & 25.5mm), and in some versions of the 4AGE very similar port shapes & sizes. When fully prepared for racing, they both produce similar hp figures at similar revs, so it would seem that Toyota has done an excellent job with them."
"This is a 2 litre BDA (Belt Driven, series A engine), which is basically identical to the 1.6 litre BDA."
Is this engine from the Sierra? If so the RS500 and not general production RS I am guessing (what engine was the RS).
Is it physically a bigger engine [Or if by some chance you came across one it would be a bolt in to a 4age enginebay setup, or even if you only got your hands on the block, adapting it to a 4age head]? t does state an "A" series engine, so I curious exactly how close it is to an a series Toyota engine and not just being similar. Hellishly rare and expensive engine?
|
|
|
