Author | Topic |
Location: Brisbane
Registered: October 2002
|
HPI Savage Monster Truck RC
|
Wed, 06 July 2005 06:17
|
|
i have for sale my HPI Savage Remote control monster truck, its a very quick high jumping bashing machine
When i say high i mean high, i have jumped it 5m HIGH not long and landed it and driven away, have jumped approx 10m long at the same time.
The savage is the BEST off road nitro monster truck on the market, it can take an absolute smashing, they have a range of after market parts and hop-ups,
there is come absolutely pimpin bodies available
just add bigger wheels
included are as follows,
Hitec HS645 hi torque steering servo, coupled with servo saver gives massive steering capabilities {also have a spare one}
Ofna throttle mod {gives better throttle respose and control}
4 spider diff mod {makes it lock harder and makes it stronger
heavier shock oil to make it corner better
a few spare clutch bells for different gearing
speedo/odometer {arm fell off tho $10 to replace}
ofna high power hump pack for extended driving and strong servos
fail safe, unlike the tyco toys u had when u were 10, if these go out of range at full speed, they just keep going till they slam into something at 70kph, the fail safe stops that, it locks the brakes up
motorsaver air filter {bigger}
lotsa spares
u can also now get a .46 motor, which makes spastic samounts of power is 0.46 of a cubic inch and makes 5hp {3000hp per litre}
and a 3 speed transmission
full spools {lock diffs}
go to www.towerhobbies.com and look at the price of spare parts, or can be bought through ebay, u can make the entire car out of alloy bits to bling it up
needs:
radio gear, my mate has a spare set i can get for cheap
ignitor/charger {best to get one that can do the hump pack too}
might need new diff gears {$15} may have spare set anyway
fuel {duh}
tune up, hasnt been run for a few weeks
selling due to my bloody corona need work
$500 replacement cost well in excess of $1200
may consider swap for W50/55/ ect ect, or twin turbo 1UZFE
offers too
call after 5pm 0405 131728
or PM/email ect ect
Features:
Nitro Star S-25 engine (ABC) with slide carburetor
Purple anodized, billet aluminum heatsink engine head
Adjustable upper arms with thick steel turnbuckles
Stiff purple shock springs
Pre-trimmed unpainted Nitro GT-1 truck body with pre-cut decals
Giant 1/8th scale (16.8" x 21")
40+ miles an hour!
Full-time shaft driven four wheel drive
Complete set of rubber sealed ball bearings
High performance aluminum ribbed tuned pipe
Aluminum high flow tube rear exhaust header
Cast aluminum heavy-duty engine mount
Heavy-duty drivetrain and suspension optimized for big-block engines
Hardened metal differential gears
Extra tuning gears for off-road and on-road performance
Heavy-duty chromed steel dogbones
Adjustable 2 speed transmission with heavy-duty metal internal gears
Adjustable slipper clutch
Adjustable disc brake
Wide-track suspension (nearly 17 inches wide!)
Stainless steel inboard hinge pins with anodized aluminum braces
8 long stroke oil-filled coilover shock absorbers
Rigid aluminum TVP chassis (Twin Vertical Plates)
Large 160cc primerless fuel tank
Enclosed radio box for protection of electronics
Front and rear skidplate bumpers
Adjustable body posts (with an extra mount for SUV bodies)
Chrome 5 spoke wheels and all-terrain tires with inner foam
|
|
|