F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » MR2 Gen3 conversion, error code 14 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
DamMR2T Occasional Poster Location: NSW Registered: August 2003	MR2 Gen3 conversion, error code 14 Sat, 03 December 2005 11:58 Just finished my Gen3 Conversion, but when i try start the car it starts but cuts out straight away(can't even rev it). I checked for error codes and have an error code 14, which is: No IGF signal to ECU 8 - 11 times in succession. *Igniter and ignition coil circuit *Igniter and ignition coil *ECU If you have an error code 14, should the car still idle,or does the ecu stop the engine? I need to know this to work out if i have one problem or two. What are the things i should check for eror code 14? I will swap my igniter and see if that works, but other than that i'm not sure. [Updated on: Sun, 04 December 2005 04:53] [Report message to a moderator]

	Subject	Poster	Date
	MR2 Gen3 conversion, error code 14	DamMR2T	Sat, 03 December 2005 11:58
	Re: MR2 Gen3 conversion, error code 14	sideshow	Sat, 03 December 2005 23:18
	Re: MR2 Gen3 conversion, error code 14	DamMR2T	Sat, 03 December 2005 23:57
	Re: MR2 Gen3 conversion, error code 14	sideshow	Sun, 04 December 2005 00:55
	Re: MR2 Gen3 conversion, error code 14	DamMR2T	Sun, 04 December 2005 04:51
	Re: MR2 Gen3 conversion, error code 14	davedave	Sun, 04 December 2005 19:49
	Re: MR2 Gen3 conversion, error code 14	DamMR2T	Tue, 06 December 2005 10:42
	Re: MR2 Gen3 conversion, error code 14	camryGT?	Sun, 11 December 2005 02:47

Previous Topic:	topping up trolley jack oil
Next Topic:	Just bought an RA65

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.