F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Crank sensor on 1jz-gte (installing a Wolf3D) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
jbrough Regular Location: Melbourne Registered: February 2003	Crank sensor on 1jz-gte (installing a Wolf3D) Sun, 09 February 2003 12:38 I have bought a Wolf3D to run a 1JZ-GTE conversion. The ECU manual talks about the different crank sensor it can use, and the timing. What sort of crank sensor do these motors use? The installation book also talks about the sensor being 60 degrees BTDC, is the Toyota sensor anything like this? [Updated on: Fri, 14 February 2003 06:08] [Report message to a moderator]

	Subject	Poster	Date
	Crank sensor on 1jz-gte (installing a Wolf3D)	jbrough	Sun, 09 February 2003 12:38
	Re: Cank sensor on 1jz-gte (installing a Wolf3D)	Youngy	Sun, 09 February 2003 12:45
	Re: Cank sensor on 1jz-gte (installing a Wolf3D)	GTI16V	Sun, 09 February 2003 21:19
	Re: Cank sensor on 1jz-gte (installing a Wolf3D)	Pete	Mon, 10 February 2003 10:09
	Re: Cank sensor on 1jz-gte (installing a Wolf3D)	jbrough	Tue, 11 February 2003 00:10

Previous Topic:	Dash wiring (general)
Next Topic:	4agze wiring help!!!! PLEASE

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.